MT3S111 2014-03-01 1 toshiba transistor silicon-germ ani um npn epitaxial planar type MT3S111 vhf-uhf low-noise, low-distortion amplifier applications features ? low-noise figure: nf=0.9 db (typ.) (@ f=1 ghz) ? high gain:|s 21e | 2 =12 db (typ.) (@ f=1 ghz) marking absolute maximum ratings (ta = 25c) characteristics symbol rating unit collector-emitter voltage v ces 13 v collector-emitter voltage v ceo 6 v emitter-base voltage v ebo 0.6 v collector-current i c 100 ma base-current i b 10 ma collector power dissipation p c 160 mw collector power dissipation p c (note 1) 700 mw junction temperature t j 150 c storage temperature range t stg ? 55 to 150 c note 1: the device is mounted on a cera mic board (25.4 mm x 25.4 mm x 0.8 mm (t)) note: using continuously under heavy loads (e.g. the applic ation of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/v oltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and indi vidual reliability data (i.e. reliability test report and estimated failure rate, etc). unit: mm s-mini jedec to-236 jeita sc-59 toshiba 2-3f1a weight: 0.012 g (typ.) r 5 1. base 2. emitter 3. collector start of commercial production 2007-12
MT3S111 2014-03-01 2 microwave characteristics (ta = 25c) characteristics symbol test condition min typ. max unit transition frequency f t v ce =5 v, i c =30 ma 9 11.5 ? ghz |s 21e | 2 (1) v ce =5 v, i c =30 ma, f=500 mhz ? 17.5 ? db insertion gain |s 21e | 2 (2) v ce =5 v, i c =30 ma, f=1 ghz 10 12 ? db nf(1) v ce =5 v, i c =30 ma, f=500 mhz ? 0.65 ? db noise figure nf(2) v ce =5 v, i c =30 ma, f=1 ghz ? 0.9 1.2 db 3 rd order intermodulation distortion output intercept point oip 3 v ce =5 v, i c =30 ma, f=500 mhz, S f=1 mhz ? 32 ? dbmw electrical character istics (ta = 25c) characteristics symbol test condition min typ. max unit collector cut-off current i cbo v cb =5 v, i e =0 a ? ? 0.1 a dc current gain h fe v ce =5 v, i c =50 ma 200 ? 400 ? output capacitance c ob v cb =5 v, i e =0 a, f=1 mhz ? 1.45 ? pf reverse transfer capacitance c re v cb =5 v, i e =0 a, f=1 mhz (note 2) ? 0.9 1.2 pf note 2 : c re is measured using a 3-terminal method with capacitance bridge caution: this device is sensitive to electrostatic dischar ge due to the high frequency transistor process of f t =60 ghz class which is used for this product. please make tool and equipment earthed enough when you handle.
MT3S111 2014-03-01 3 h fe -i c i c -v be dc current gain h fe 10 100 1000 1 10 100 common emitter vce=5v ta= 25c collector-current i c (ma) 0.001 0.01 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1 common e mitte r vce=5v ta= 25c collector-current i c (ma) base-emitter voltage v be (v) i c -v ce f t -i c collector-current i c (ma) 0 10 20 30 40 50 60 70 0123456 common emitter ta= 25c ib= 40 a 80 a 120 a 160 a 200 a transition frequency f t (ghz) 0 5 10 15 110100 vce=5v ta= 25c collector-emitter voltage v ce (v) collector-current i c (ma) |s 21e | 2 -i c nf-i c insertion gain |s 21e | 2 (db) 0 2 4 6 8 10 12 14 16 18 20 110100 vce=5v ta= 25c f = 1ghz f = 500mhz noise figure nf(db) 0.0 0.5 1.0 1.5 2.0 2.5 1 10 100 vce=5v ta=25c f = 500mhz f = 1ghz collector-current i c (ma) collector-current i c (ma)
MT3S111 2014-03-01 4 c re ,c ob -v cb oip 3 -i c reverse transfer capacitance c re (pf) output capacitance c ob (pf) 0 0.4 0.8 1.2 1.6 2 2.4 0.1 1 10 ie=0 f=1mhz ta= 25c cob cre third order intermodulation distortion output intercept point oip 3 (dbmw) 0 5 10 15 20 25 30 35 40 110100 vc e=5 v f1=500mhz f2=501mhz pin=-15dbmw ta=25c collector-base voltage v cb (v) collector-current i c (ma) p c -t a collector power dissipation p c (mw) 0 100 200 300 400 500 600 700 800 0 25 50 75 100 125 150 the device is mounted on a ceramic- board(25.4mm25.4mm0.8mm(t)) device only ambient temperature t a ( c )
MT3S111 2014-03-01 5 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively "toshiba"), reserve the right to make changes to the in formation in this document, and related hardware, software and systems (collectively "product") without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba's written permission, reproduc tion is permissible only if reproduction is without alteration/omission. ? though toshiba works continually to improve product's quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. befo re customers use the product, create designs including the produc t, or incorporate the product into their own applications, customers must also refer to and comply with (a) the latest versions of al l relevant toshiba information, including without limitation, this document, the specifications, the data sheets and application notes for product and the precautions and conditions set forth in the "toshiba se miconductor reliability handbook" and (b) the instructions for t he application with which the product will be used with or for. custom ers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the approp riateness of the use of this product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, a lgorithms, sample application circuits, or any other referenced documents; and (c) validating all operating pa rameters for such designs an d applications. toshiba assumes no liability for customers' product design or applications. ? product is neither intended nor warranted fo r use in equipments or systems that require extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage and/or serious public impact ( " unintended use " ). except for specific appl ications as expressly stated in this document, unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used f or automobiles, trains, ships and other transportation, traffic si gnaling equipment, equipment used to control combustions or expl osions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. if you use product for unintended use, toshiba assumes no liability for product. for details, please contact your toshiba sales representative. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, w hether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, busin ess interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditio ns of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technolog y products (mass destruction weapons). product and related soft ware and technology may be controlled under the applicable export laws and regulations including, without limitation, the japanese fore ign exchange and foreign trade law and the u.s. export administ ration regulations. export and re-export of product or related software or technology are strictly prohibited except in compliance wit h all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
|
